Transmitter Signal Not Received

Posssible Issue: 

a) Transmitter not properly powered.

b) Transmitter is located too far from RF

receiver.

c) There is metal shielding between

transmitter and RF receiver.

d) Transmitter is malfunctioning.

e) Transmitter No. (zone) is not

programmed. 

Possible Fix:

a) Check or change transmitter's battery.

b) Move transmitter or RF receiver.

c) Check for large metal obstructions, then relocate transmitter if necessary.

d) Verify by activating control with another, similar transmitter. If O.K. now, contact GeoArm if it was purchased through us as this may be a defective part.

e) Verify programming.