Help Center1) enter Installer Code into a PROGRAMMING KEYPAD ONLY (Default 4112) + 800
2) enter *92
3) Enter Desired Field (Input guide will be posted below this)
Inputs:
Entry 1:
0 = disabled
1-15 = 1 min - 15 min
#+10 = 10 min
#+11 = 11 min
#+12 = 12 min
#+13 = 13 min
#+14 = 14 min
#+15 = 15 min
Entry 2:
0 = Keypad display when line is faulted
1 = Keypad display plus keypad trouble sound
2 = Same as “1”, plus programmed output device STARTS. If either partition is armed, external sounder activates also.
NOTE: Output Device must either be programmed to be STOPPED in field ✱80 or STOPPED by Code + # + 8 + output number.
4) enter *99 to exit programming
Note:
The Vista 15P does not have partitions, any fields dealing with partitions will not be available on the Vista 15P
Programming Manual For More Information
GeoArm can assist in changing the installer code upon activation.