1) enter Installer Code into a PROGRAMMING KEYPAD ONLY (Default 4112) + 800

2) enter *90

3) Enter Desired Field (Input guide will be posted below this)

Inputs:

NOTE: System messages are logged when any non-zero entry is made.

&nbsp;0 = None
&nbsp;1 = Alarm/Alarm Restore
&nbsp;2 = Trouble/Trouble Restore
&nbsp;4 = Bypass/Bypass Restore
&nbsp;8 = Open/Close. Example: To select “Alarm/Alarm Restore”, and “Open/Close”, enter 9 (1 + 8); To select all, enter #15.

4) enter *99 to exit programming

Note:
The Vista 15P does not have partitions, any fields dealing with partitions will not be available on the Vista 15P

Programming Manual For More Information:

https://turbifycdn.com/ty/cdn/yhst-51756635596032/honeywell-vista-20p-control-panel-programming-guide.pdf

GeoArm can assist in changing the installer code upon activation.

1) enter Installer Code into a PROGRAMMING KEYPAD ONLY (Default 4112) + 800

2) enter *90

3) Enter Desired Field (Input guide will be posted below this)

Inputs:

NOTE: System messages are logged when any non-zero entry is made.

 0 = None
 1 = Alarm/Alarm Restore
 2 = Trouble/Trouble Restore
 4 = Bypass/Bypass Restore
 8 = Open/Close. Example: To select “Alarm/Alarm Restore”, and “Open/Close”, enter 9 (1 + 8); To select all, enter #15.

4) enter *99 to exit programming

Note:
The Vista 15P does not have partitions, any fields dealing with partitions will not be available on the Vista 15P

Programming Manual For More Information:

https://turbifycdn.com/ty/cdn/yhst-51756635596032/honeywell-vista-20p-control-panel-programming-guide.pdf

GeoArm can assist in changing the installer code upon activation.

Event Log Enables Vista 15p-20p

Prepare System for Activation of Monitoring Vista 15p-20p

What's The Difference Between The Vista 15P and 20P Vista 15p-20p

Zone Programming Menu Mode - Programming a New Zone 20p - Adding a New Sensor Vista 15p

Alpha Descriptor Menu Mode / Label Zones / Name Zones Vista 20p/ Zone Naming Vista 15p

Compatible Communicator Vista 15p-20p

Vista 20P Documentation

Set Time and Date Vista 15p-20p

M2M MN02-LTE Cellular Communicator: Wiring Honeywell Vista Panels for Communications/App Control

M2M MQ03-LTE Dual-Path Communicator: Honeywell Vista Installation

Alarm.com ADC-SEM Honeywell Vista Installation

Resideo LTEM-P Series Communicator Installation

Resideo LTEM-XA/LTEM-XV Cellular Communicator: Installation

Alula BAT-Connect Honeywell Vista Installation (KEYBUS)


Honeywell Vista 20P : How to do a Total Connect 2.0 chip upgrade on a Vista 20p

Honeywell Vista 20P : How to Program a 5816 Wireless Door/Window Contact using a 6160rf keypad

Honeywell Vista 20P : How to Program a 5800PIR Wireless Motion Detector using a 6160rf


Honeywell 6150 : How to swap a 6150 for a 6160 programming keypad



Honeywell Vista 20P : How to Program a 5853GBD Wireless Glass break Detector using a 6160rf keypad


Honeywell Vista 20P : How to Program House I.D using a 6160 keypad

Honeywell Vista 20P : How to Program a Wireless 5800Co device using a 6160rf keypad


Honeywell Vista 20P : How to Program a 5802 Wireless Panic Pendant using a 6160rf keypad


Honeywell Vista 20P : How to Program a Honeywell 5811 Wireless Door contact using a 6160rf keypad


Honeywell Vista 20P : How to Program a 5898 Wireless Motion/Temperature Sensor using a 6160rf keypad


Honeywell Vista 20p : Wiring Macurco GD-2a gas detector


How to Address a Honeywell Wired Keypad 6160 or 6160rf?


How to Address a Honeywell Wired Keypad 6150rf?


How to Address a Honeywell Vista Touchscreen Keypad?


How to Address a Honeywell Wired Keypad 6150?


ECP Fail Display Vista 15p-20p

Display Partition Number Vista 15p-20p

Exit Time Display Interval Vista 15p-20p

Keypad 8 Device Address 23 Vista 15p-20p

Keypad 7 Device Address 22 Vista 15p-20p

Keypad 6 Device Address 21 Vista 15p-20p

Keypad 5 Device Address 20 Vista 15p-20p

Keypad 4 Device Address 19 Vista 15p-20p

Keypad 3 Device Address 18 Vista 15p-20p

Keypad 2 Device Address 17 Vista 15p-20p

KEYPAD OPTIONS Fields 190 -196  Vista 15p-20p

Initialize Download ID - Reset Defaults - Reset Factory Defaults - Default Panel - Hard Reset Vista 15p-20p

Reports In Armed Period Vista 15p-20p

Phone Line Monitor Enable Vista 15p-20p

Option Selection - Enable Remote Internet Services - Enabling App Control In Programming Vista 15p-20p

SEM Zone Expander Not Showing - Only First 8 Zones Showing Up Vista 15p-20p

Misc Fault Delay Time Vista 15p-20p

Cancel Verify Keypad Display Vista 15p-20p

What Kind of Resistors are Used - Resistors Used

Cross Zone Timer - Zone Verification Timer Vista 15p-20p

Auto Arm Stay - Auto Stay Arm Vista 15p-20p

Change Daylight Savings Time Start-End Weekend Vista 15p-20p

Changing Daylight Savings Time Start-End Month

Event Log Full Report Code  Vista 15p-20p

Test Restore Report Code Vista 15p-20p

RF Transmission Low Battery Restore Report Code  Vista 15p-20p

Low Battery Restore Report Code Vista 15p-20p

AC Restore Report Code  Vista 15p-20p

Bypass Restore Report Code Vista 15p-20p

Trouble Restore Report Code  Vista 15p-20p

Alarm Restore Report Code  Vista 15p-20p

Recent Closing Report Code  Vista 15p-20p

Cancel Report Code Vista 15p-20p

RF Transmission Low Battery Report Code  Vista 15p-20p

Arm Away - Arm Stay Report Code Vista 15p-20p

Open Report Code Vista 15p-20p

Test Report Code Vista 15p-20p

Low Battery Report Code  Vista 15p-20p

AC Loss Report Code Vista 15p-20p

Bypass Report Code Vista 15p-20p

Trouble Report Code Vista 15p-20p

Exit Error Alarm Report Code Vista 15p-20p

Dynamic Signaling Priority Vista 15p-20p

Dynamic Signaling Delay Vista 15p-20p

SESCOA-Radionics Select  Vista 15p-20p

Burglary Dialer Delay Vista 15p-20p

Report Format Vista 15p-20p

Change Phone System Selected Vista 15p-20p

Partition 2 Secondary Account Number Vista 15p-20p

Partition 2 Primary Account Number Vista 15p-20p

Secondary Account Number Main Partition Vista 15p-20p

Change Secondary Phone Number Vista 15p-20p

Change Primary Phone Number Vista 15p-20p

PABX Access Code or Call Waiting Disable Vista 15p-20p

Power Up In Previous State Vista 15p-20p

Arming Ding - Confirmation Of Arming Ding Vista 15p-20p

Audible Exit Warning Vista 15p-20p

Entry Delay 2 Vista 15p-20p

Change Entry Delay 1 Vista 15p-20p

Change Exit Delay Vista 15p-20p

Alarm Sounder Bell Timeout Vista 15p-20p

Fire Alarm Sounder Timeout - Fire Alarm Siren Time Vista 15p-20p

Single Alarm Sounding Per Zone - Alarm Sounds per Zone Vista 15p-20p

Long Range Radio Output - Enable Communication Devices Vista 15p-20p

Access Code For Phone Module Vista 15p-20p

Powerline Carrier Device X10 House Code Vista 15p-20p

Chime By Zone - Change System Chime Settings Vista 15p-20p

RF House ID Code - Keypad Address Code Vista 15p-20p

Quick Bypass - Forced Bypass - Quick Bypass Settings Vista 15p-20p

RF Jam Option - Sensor RF Verification Vista 15p-20p

Quick Arm Settings Vista 15p-20p

Vista 20P & Vista 15P

GeoArm Support Center