Dynamic Signaling Delay Vista 15p-20p

1) enter Installer Code into a PROGRAMMING KEYPAD ONLY (Default 4112) + 800

2) enter *54

3) Enter Desired Field (Input guide will be posted below this)

Inputs:

Select delay from 0 to 225 secs, in 15-sec increments.

 0 = no delay (both signals sent)

1 = 15 secs

2 = 30 secs

etc.

6 = 90

15 = 225

6 is a typical number set in this field

4) enter *99 to exit programming

Note:

The Vista 15P does not have partitions, any fields dealing with partitions will not be available on the Vista 15P

Programming Manual For More Information

GeoArm can assist in changing the installer code upon activation.