1) Tap on the grey bar at the top middle of the screen

2) Tap Settings

3) Tap Advanced Settings

4) Enter Dealer Code (Default 2222)

5) Tap Installation

6) Tap Security and Arming

7) Tap Arm Stay - No Delay

1) Tap on the grey bar at the top middle of the screen

2) Tap Settings

3) Tap Advanced Settings

4) Enter Dealer Code (Default 2222)

5) Tap Installation

6) Tap Security and Arming

7) Tap Arm Stay - No Delay

Disable Arm Stay Counter IQ2


 Signing Up For Monitoring Qolsys 2 Panel

How to Pair Smart Phone for Bluetooth Disarming

Is the Image Sensor Card Included

Why Cant I Program an Image Sensor

Why does Alarm Sound after Pressing Arm Stay

Can the Internal Glassbreak Sensitivity be Adjusted

Will Qolsys IQ Panel 2 work with Power G Sensors

Can the Garage Door Status be Viewed and Controlled from the IQ Panel 2

Change Brightness IQ2

Change Volume IQ2

Change Language IQ2

Clean Screen Mode IQ2

View Message Alerts IQ2

Enter Settings IQ2

Enter Advanced Settings IQ2

Run a Scene IQ2

Default Master Code IQ2

Default Dealer Code IQ2

Default Installer Code IQ2

Manage Users / Change Duress code IQ2

Program A Sensor / Auto Learn Mode IQ2

Change Installer Code IQ2

Forgot Dealer Code - Forgot Installer Code IQ2

Reset To Factory IQ2

Change Date and Time IQ2

Sensor Test IQ2

Run a Wifi Test IQ2

Run a Z Wave Test IQ2

Run a Dual Path Test Q2

Run a Daughter Cards Test IQ2

Run a Panel Test IQ2

Run a PowerG Test IQ2

Run a Panel Glass Break Test IQ2

Change Temperature Measurement IQ2

Check Panel Status / Check Alarm Status / Check History IQ2

Trigger a Panic Alarm IQ2

View Z Wave Status / Z Wave Device Status IQ2

View Other Z Wave Devices IQ2

View Automation Processes IQ2

View Activity Monitoring Sensors IQ2

View Licenses IQ2

Manage Energy Optimization IQ2

Manage Wifi Devices IQ2

Connect To Wifi / learn Into Wifi IQ2

Manage Access Point Settings IQ2

Manage Access Point Connection IQ2

Manage IQ Remote Devices IQ2

Manage Z Wave Devices IQ2

Add Z Wave Device IQ2

Edit Z Wave Devices IQ2

Remove Z-Wave Device IQ2

Z wave failed to learn / Delete Failed Z wave device IQ2

Wipe all Z-Wave Devices / Clear all Z Wave Devices IQ2

View associations Z Wave Devices / Edit Association Z Wave Devices IQ2

Manage Z Wave Device Options / Z Wave Settings IQ2

Connect Phone With Bluetooth IQ2

Edit Bluetooth Device IQ2

Delete Bluetooth Device IQ2

Remove All Bluetooth Devices IQ2

Manage Bluetooth Settings IQ2

Change Power Settings When On Battery Only IQ2

Ignoring Sensors After A Power Cycle / SIA Power Restoration IQ2

Add Languages In Panel IQ2

Enable 6 Digit User Codes IQ2

Enable Commercial Sensor and Device Names IQ2

Allow Master Code to Access Security IQ2

Detect Sensor Jams / Detect RF Jam IQ2

Allow Master Code To Manage Sensors IQ2

Enable Panel Glass Break Detector IQ2

Panel Motion Detector IQ2

Erase All User Data IQ2

Manage System Logs IQ2

Allow Master Code To Access Sirens and Alarms IQ2

Enable Two Trip Verifications For Alarms IQ2

Enable Siren Annunciation IQ2

Configure Panel Sirens IQ2

Change Dialer Delay IQ2

Change Siren Timeout IQ2

Enable Swinger Shutdown IQ2

Disable Panel Tamper IQ2

Enable Secure Arming IQ2

Refuse Arming When Low Battery IQ2

Auto Bypassing IQ2

Disable Auto Stay IQ2

Enable Exit Time Extension IQ2

Enable Keyfobs to Disarm System IQ2

Enable Keyfob Instant Arming IQ2

Enable Master Code to Access Security and Arming IQ2

Change Exit / Entry Delay IQ2

Manage Camera Settings IQ2

Secure Delete Images IQ2

Panel Camera Usage IQ2

Disarm Photos Settings IQ2

Alarm Photos Settings

Settings Photos Settings IQ2

Allow Master Code To Access Camera Settings

Battery Information

View Software Information IQ2

View Hardware Information IQ2

Qolsys Panel 2

GeoArm Support Center